Fuel/Water Separator - Diesel - Winnebago Ellipse User Manual

SECTION 3 –
DRIVING YOUR MOTOR HOME
4. Remove fasteners from the secondary black
metal engine cover and set cover aside. You
have now accessed the engine.
5. Reverse steps to reinstall rear engine covers,
making sure to lock the middle engine cover
lock by turning key clockwise.
Engine Top Access Cover (Beneath
Lavatory Cabinet)
In some cases, you may need further access of
the rear engine (beyond removing the engine
access cover under the bathroom rug). A
secondary engine access cover is located beneath
the lavatory cabinet.
1. Remove white access panels below lavatory
cabinet and set aside.
Access Panels
(Located below lavatory cabinet)
3-26
2. Remove fasteners from the black metal engine
cover (one located on each corner of the
cover) and set cover aside. You have now
accessed the engine.
NOTE: Removal of the cabinet face is required
to take the engine cover out and set
aside.
Engine Access Cover
(Shown with access panels removed)
3. Reverse steps to reinstall rear engine cover,
cabinet face, and access panels.
FUEL/WATER SEPARATOR –
DIESEL
®
Freightliner Chassis
Diesel fuel often contains small quantities of
water, which can damage the engine if not
filtered out. The Fuel/Water Separator traps this
water and prevents it from reaching the engine.
The harmful water deposits must be drained from
the separator canister during normal periodic
service and maintenance to keep the fuel
filtration system working effectively.
The Fuel/Water Separator is located beneath
the passenger rear side of chassis (at the forward
right side of the engine).