Engine Top Access Covers - Rear - Winnebago Journey Manual

• Engine Coolant
Reservoir
• Power Steering
Reservoir
Rear Engine
(Shown with grille panel open)
* Passenger Side
ENGINE TOP ACCESS COVERS
– REAR
The Engine Top Access Covers are only
removed if a complete view of the engine is
needed for inspection, or for replacement or
adjustment of upper engine parts.
These covers are located beneath the rear bed
and wardrobe, or rear bath floor and lavatory
cabinet, depending on model.
Take precautions to protect carpet and interior
furnishings when removing engine covers. The
undersides of the engine covers could contain
deposits of oil and fuel or other engine fluids and
substances that could damage fabrics and interior
furnishings.
Model 34B
1. Using the Engine Cover Latch Key (located
on your key ring), unlock the two Engine
Cover Latches.
• Transmission
Fluid Fill/Dipstick
• Engine Oil
Dipstick
DRIVING YOUR MOTOR HOME
• Engine Cover Latches
• Engine
Cover Pull
2. Grasp the Engine Cover Pull and lift cover to
access engine.
3. Reverse steps to reinstall engine cover.
Engine Top Access Cover (Secondary)
In some cases, you may need further access of
the rear engine (beyond removing the Engine
Top Access Cover, as previously described.) A
secondary Engine Top Access Cover is located
beneath a removable panel in the wardrobe.
• Lift removable panel (inside wardrobe).
• Remove fasteners from metal engine cover
and set aside to access engine.
• Reverse steps to reinstall engine cover.
Model 36M
1. Remove mattress from bed and set aside in
another area of the coach.
2. Lift bed board and using a screw gun, remove
the wood corner frame (if equipped) and set
aside.
SECTION 3 –
3-21