Paper Rewind Operation - Frontier LP7500 Service Manual

Distributed by: minilablaser.com

Paper rewind operation

This section explains how the paper is rewound.
Paper rewind conditions
• The paper is changed to the paper in another paper magazine from the paper which is being loaded from the paper magazine.
• No operation is made for a specified time with the paper loaded.
• Rewind Paper is selected.
• The paper end sensor is detecting the paper when the power supply is turned on.
• When an error occurs
• After paper magazine replacement, the interlock switch (printer door) is detected.
! ! ! ! Flowchart
1.
Paper rewind operation starts.
• Paper magazine motor A/A2/B/C: ON (reverse)
• Paper supply motor A/A2/B/C: ON (reverse)
2.
The paper leading end passed through the paper loading sensor.
When the paper loading sensor does not detect the paper leading end
• No. 06014-00001
Paper did not rewind. Paper Magazine A
• No. 06202-00001
Paper did not rewind. Paper Magazine A
• No. 06015-00001
Paper did not rewind. Paper Magazine B
• No. 06113-00001
Paper did not rewind. Paper Magazine C
• No. 06196-00001
Paper did not rewind. Paper Magazine A2
3.
The paper leading end passed through the paper end sensor.
When the paper end sensor does not detect the paper leading end
• No. 06014-00002
Paper did not rewind. Paper Magazine A
• No. 06202-00002
Paper did not rewind. Paper Magazine A
• No. 06015-00002
Paper did not rewind. Paper Magazine B
• No. 06113-00002
Paper did not rewind. Paper Magazine C
• No. 06196-00002
Paper did not rewind. Paper Magazine A2
4.
Stop the paper in the magazine.
• Paper magazine motor A/A2/B/C: OFF
• Paper supply motor A/A2/B/C: OFF
5.
Paper rewind operation is completed.
55600
55600
Paper advance operation
1/1