Laser Self-Diagnostic (Details Of Modes) - Frontier LP7500 Service Manual

Distributed by: minilablaser.com

Laser Self-Diagnostic (details of modes)

Also see the following references to utilize for diagnosis.
Model
Laser Self-Diagnostic (diagnosis: AUTO)
Laser Self-Diagnostic (starting/exiting)
Bringing up the display
Maintenance: 2260 → Extension → Maintenance → Self-diagnostic → Laser Self-Diagnostic
! ! ! ! FRONTIER-Printer: Ver. 2.01 or earlier, QSS-Printer: Ver. 4.02 or earlier
Laser Self-Diagnostic (AUTO)
! ! ! ! FRONTIER-Printer: Ver. 3.0 or later, QSS-Printer: Ver. 5.0 or later
Laser Self-Diagnostic (AUTO)
*1. The Laser Self-Diagnostic (MANUAL) display is the same for all versions.
N
OTE
• Laser Self-Diagnostic is supported by FRONTIER-Printer Ver. 2.0 or later, and QSS-Printer Ver. 3.0 or later.
• The Laser Self-Diagnostic of FRONTIER-Printer: Ver. 2.01 or earlier, and QSS-Printer: Ver. 4.02 or earlier has the problems
shown below.
The problems have been resolved in FRONTIER-Printer Ver. 3.0 or later, and QSS-Printer Ver. 5.0 or later.
• If Laser Self-Diagnostic is performed while the lasers are asynchronous, the message, Failed. is shown.
35950
Reference
35951 Laser Self-Diagnostic (diagnosis: MANUAL)
35953
Laser Self-Diagnostic (MANUAL)
Laser Self-Diagnostic (MANUAL)
35950
Self-diagnostic
Model
*1
*1
Reference
35952
1/4