Distributed by: minilablaser.com
Adjusting the position of the elevator lower sensor [J]
! ! ! ! Procedure
1.
Stop the elevator at the position where the elevator lower sensor detects dark in the Output Check.
•
35320
2.
Adjust the position of the elevator lower sensor so that the space between the lower bottom of the
bucket platform and the lower side of the hole of the frame is 0 to -2.0 mm. (one screw)
Lower bottom of the bucket platform
Tablet gate
Lower bottom of the bucket
Hole of the tablet replenishment
Screw
3.
Check if the tablet falls from the drum via Output Check.
•
35320
0 to -2.0 mm
Elevator lower sensor
G050744
27680
27680
Tablet replenishment section
1/1