Frontier LP7500 Service Manual page 501

Distributed by: minilablaser.com
No. 4350−4358
See the Bravo II Service Manual for Corrective action of Attention message.
Condition
I
MPORTANT
• Attention messages not explained in this Service Manual are listed in the table.
See the Bravo II Service Manual for Corrective action of Attention message.
Attention message (Bravo II)
No.4350
No.4351
No.4352
No.4353
No.4354
No.4355
No.4356
No.4357
No.4358
I
MPORTANT
• Attention messages not explained in this Service Manual are listed in the table.
For corrective action of the attention message, see the d-Storage/ CD-R external writing system Service Manual.
CD-R external writing system
No. 4360 The shared folder of Rimage CD/DVD Publishing Systems is full. Wait until the writing of CD is completed.
Attention message table
The input bin is empty. Set the media and press the Ink Cartridge button on the Bravo.
The quantity of ink in the color ink cartridge ran short. Open the cover of the Bravo and press the Ink
Cartridge button, then install the new cartridge. When continuing processing without replacing the cartridge,
press the Ink Cartridge button.
The quantity of ink in the black ink cartridge ran short. Open the cover of the Bravo and press the Ink
Cartridge button, then install the new cartridge. When continuing processing without replacing the cartridge,
press the Ink Cartridge button.
The quantity of ink in both ink cartridges ran short. Open the cover of the Bravo and press the Ink Cartridge
button, then install the new cartridges. When continuing processing without replacing the cartridges, press
the Ink Cartridge button.
The Bravo Top Cover is open. Close the cover.
The shared folder of PTBurn is full. Wait until the writing of CD is completed.
The power supply of Bravo is not ON. Turn ON the Bravo.
The data has already been written to this media. Set a new media.
Write the data. Set the media.
Attention message table
44350
44350
Attention message: Bravo II
Attention message: Bravo II
1/1