No. 06199 Pressure Release Motor A2 Operation Error - Frontier LP7500 Service Manual

Distributed by: minilablaser.com
No. 06199
Pressure Release Motor A2 operation error.
Error message release
NO
Condition
Suffix number
00001 The pressure change sensor A2 does not turn DARK even though a specified time elapsed after activating the
pressure release motor A2.
00002 The pressure change sensor A2 does not turn LIGHT even though a specified time elapsed after activating the
pressure release motor A2.
Check Point
1 Check that the paper supply unit A2 is installed correctly.
Diagnosis
Pressure release motor A2
Quad magazine PCB
Printer control PCB
Pressure change sensor A2
Quad magazine PCB
Printer control PCB
$ Symptoms due to connection failure of wiring/symptoms resulted from blowout of fuse
Symptoms due to the wiring connection failure
4202
N
OTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
46100
Operation failure
Detection failure
−
46100
Error message: Printer 2
Condition
63051
66055
66000
63051
66055
66000
Symptoms of fuse blowout
4252
Manual No.
Manual No.
30/33