Distributed by: minilablaser.com
Removing the print conveyor unit
! ! ! ! Procedure
1.
Remove the processor drive cover.
20020
2.
Open the squeegee unit top cover.
3.
Lift up the lever and open the dryer door.
Squeegee unit top cover
4.
Lower conveyor stay 2 and insert the philips blade screwdriver (small) to the square hole.
I
MPORTANT
• Do this not to get your hands pinched with stay 2 or the print conveyor unit after you remove the screw from
stay 2.
5.
Remove the screw from stay 2 of the print conveyor unit.
6.
Remove the conveyor guide. (three nuts)
27420
Lever
Conveyor stay 2
Conveyor stay 1
Viewed from the back
Conveyor guide
27420
Order sorter section
Dryer door
Print conveyor unit
G085451
G070290
G090231
1/3