No. 01552 The Paper In The Colorimeter Is Too Short. It Cannot Be Measured - Frontier LP7500 Service Manual

Distributed by: minilablaser.com
No. 01552
The paper in the Colorimeter is too short. It cannot be measured.
Attention message release
YES
Condition
Suffix number
00001 While feeding test print in the colorimeter unit, paper sensor 1 turned DARK. After that, paper sensor 1 turned
LIGHT before advancing a specified amount of paper.
00002 While feeding test print in the colorimeter unit, paper sensors 1 and 2 turned DARK. After that, paper sensor 1
turned LIGHT before advancing a specified amount of paper.
N
OTE
• See the setup print color measuring operation flow.
Check Point
1 Check that a short test print has not been inserted.
2 Carry out each correction via Colorimeter Unit Adjustment.
Diagnosis
Paper sensor 1 or 2
Paper advance motor
Processor control PCB
Processor I/O PCB 2
Colorimeter unit
N
OTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
41550
56610
Failed part
41550
Attention message: Colorimeter
Condition
63318
66200
66211
27460
Attention message: Colorimeter
Manual No.
1/3