Table of Contents
Advertisement
Distributed by: minilablaser.com
No. 05511
The circulation pump has stopped. CD
No. 05512
The circulation pump has stopped. CD2
No. 05513
The circulation pump has stopped. BF
No. 05514
The circulation pump has stopped. BF2
No. 05515
The circulation pump has stopped. STB1
No. 05516
The circulation pump has stopped. STB2
No. 05517
The circulation pump has stopped. STB3
No. 05518
The circulation pump has stopped. STB4
Alarm release
NO
Error message release
YES
Condition
Error message No.
No. 05511-00000
No. 05512-00000
No. 05513-00000
No. 05514-00000
No. 05515-00000
No. 05516-00000
No. 05517-00000
No. 05518-00000
Check Point
1
Check that the filter cartridge is not soiled.
Diagnosis
Circulation pump
Processor I/O PCB 1
Processor relay PCB
Processor control PCB
$ Symptoms due to connection failure of wiring/symptoms resulted from blowout of fuse
Symptoms due to the wiring connection failure
−
The rotation detector built in the P1 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the P1-2 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the P2 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the P2-2 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the PS1 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the PS2 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the PS3 circulation pump detects that the pump has stopped rotating.
The rotation detector built in the PS4 circulation pump detects that the pump has stopped rotating.
Failed part
4203
45500
Condition
Symptoms of fuse blowout
45500
Error message: Processor 1
Manual No.
63290
66210
66220
66200
4252
9/14
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
