Standard Replenishment Amount Setting[F - Frontier LP7500 Service Manual

Qss-37 series

Table of Contents

Distributed by: minilablaser.com

Standard Replenishment Amount Setting[F]

! ! ! ! Display

Bringing up the display

Maintenance: 2260 → Extension → Processor Settings → Standard Replenishment Amount Setting

! ! ! ! Explanation

• Enter the service personnel password (2260) to set the standard replenishment amount of P1R, P2RA and P2RB.

! ! ! ! Standard Replenishment Amount Setting (Input range: 0.1 to 500.0 mL/m2)

The standard replenishment amount of P1R, P2RA, P2RB and PSR can be specified on the Standard Replenishment Amount Setting.

• In the replenishment package or process specification change, change the standard replenishment amount only when the instruction

for changing the standard replenishment amount arrives from the manufacturer.

• Do not change the standard replenishment amount without the instruction from the manufacturer.

! ! ! ! Replenishment rate by magazine (Initial value: 1.0 for P1R/P2RA/P2RB/PSR) (Input range: from 1.0 to

The standard replenishment amount of P1R/P2RA/P2RB, PSR can be specified for each Width, Paper Surface and Magazine ID.

• If using professional paper, change Replenishment rate by magazine only when the instruction is given by the manufacturer.

• Do not change the Replenishment rate by magazine without the instruction from the manufacturer.

• Example: Basic replenishment amounts when Replenishment rate by magazine of P1R/P2RA/P2RB is set to 1.2 for a paper

magazine whose Width is 127 mm and Paper Surface is (1)

replenishment

Replenishment rate by

Basic replenishment amount after Replenishment rate

by magazine is changed

Processor Settings

Show Quick Links

Table of Contents