Distributed by: minilablaser.com
No. 06211
Paper remains in the Exposure Advance Unit.
Error message release
YES
Condition
Suffix number
00001
After the initial operation, after turning on the system, after releasing the error of paper jam, or after opening or
closing the printer door, the status of exposure start sensor was DARK.
Check Point
1
Confirm whether the paper remains at exposure start sensor in the printer.
2
Check that the exposure start sensor is not soiled.
3
Carry out Paper Sensor LED Light Intensity Adjustment in Functions of Paper Sensor Adjustment.
36000
Diagnosis
Exposure start sensor
Printer I/O PCB 3
Printer control PCB
$ Symptoms due to connection failure of wiring/symptoms resulted from blowout of fuse
Symptoms due to the wiring connection failure
4202
N
OTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
46200
Detection failure
−
46200
Condition
63070
66040
66000
Symptoms of fuse blowout
−
Error message: Printer 3
Manual No.
10/21