Laser Self-Diagnostic (Diagnosis Auto) - Frontier LP7500 Service Manual

Distributed by: minilablaser.com

Laser Self-Diagnostic (diagnosis AUTO)

Also see the following references to utilize for diagnosis.
Model
Laser Self-Diagnostic (details of modes)
Laser Self-Diagnostic (starting/exiting)
• For the symptoms for which Laser Self-Diagnostic is and is not effective, see
! ! ! ! Diagnosis (AUTO)
1.
Click Diagnosis on the Laser Self-Diagnostic display.
N
OTE
• It takes approximately 2 minutes to complete Laser Self-Diagnostic.
2.
The Laser Self-Diagnostic program diagnoses Light Source Status (R), Light Source Status (B),
Synchronous Detection Setting Value, Synchronization frequency and Polygon mirror (Locked)
of the laser unit.
N
OTE
• At the same time the above diagnosis is performed, error records of
are searched and the number of occurrence is counted.
3.
The diagnosis result of Laser Self-Diagnostic program is shown.
N
OTE
• It takes ten minutes at a maximum until the diagnosis result is shown.
Example: If the diagnosis result is normal (FRONTIER-Printer: Ver. 2.01 or earlier, QSS-Printer: Ver.
4.02 or earlier)
Laser Self-Diagnostic
35951
Reference
35950 Laser Self-Diagnostic (diagnosis: MANUAL)
35953
Explanation (Laser Self-Diagnostic) 35950.
No. 06106 G Laser light source status error.
Laser Self-Diagnostic (graph (R))
35951
Self-diagnostic
Model Reference
35952
1/3