No. 00703[Sm] Would You Like To Initialize The Remaining Amount Of The Replenishment Package - Frontier LP7500 Service Manual

Distributed by: minilablaser.com
No. 00703[SM]
Would you like to initialize the remaining amount of the Replenishment Package?
Attention message release
YES or NO
• Select YES to bring up the message No. 0704: Press the [YES: Execute] to initialize the remaining amount of the Replenishment
Package.
• Select NO to return to the regular print display.
I
MPORTANT
• If the replenishment package is replaced before it becomes completely empty, be sure to initialize the remaining amount
of the replenishment package.
• If the replenishment package is not replaced but attached again, the process will be continued without initializing the
remaining amount of the replenishment package.
Condition
Suffix number
00000 Before the replenishment package is completely empty, replenishment package sensor 1 or 2 turns off.
Diagnosis
Failure in the attaching position adjustment of the replenishment package sensor
Replenishment package sensor
SM I/O PCB
Processor control PCB
N
OTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
40700
Adjustment failure point
Failed part
40700
Attention message: SM replenishment
Condition
63300
63300
66600
66200
Manual No.
Manual No.
4/6