Frontier LP7500 Service Manual page 307

Distributed by: minilablaser.com
Backup data
Item
LASER
Correction Data for Brightness
of the Edge of Image Field
• ALL: Data that is saved or loaded in Writing All Data and Reading All Data
• DATA2: Service data that is saved or loaded in INITIAL DATA2
• DATA3: Service data that is saved or loaded in INITIAL DATA3
! ! ! ! Data that will not be replaced by backup data
Basically, all data are replaced by backup data.
Data below are not replaced.
Data of total counter, daily totals counter, daily sales totals, remaining amount of paper, order number, archive number, total counter 2,
*1
laser operation record , exposure adjustment, and serial number of colorimeter calibration plate
Machine Type Registration, Language, IP Address, Subnet mask, Default gateway, Serial Number (Printer/Processor), Date of
shipment, and Communication Speed Setting of Machine Specification
*1. Laser operation record data are maintained in the laser unit body. Performing Write/Reading all data will not write/read data of laser operation
record.
! ! ! ! Data that cannot be saved
The following data cannot be saved in Reading and Writing Data. When replacing the HDD or PC main unit, be sure to save the
following data beforehand.
Data name
Output Device Name in Output Device Registration
! ! ! ! Restrictions of usable storage media
" Use the storage media of removable disks.
" CD-R/RW
Not available.
35400
File name
Laser.lzh Laser control PCB data
LsrSHD_X.Izh Correction data for brightness of the edge of image field of the laser
engine
Data that are not replaced
35400
Remarks
Maintenance
A D D
L A A
L T T
A A
2 3
# # -
# # -
2/2