Frontier LP7500 Service Manual page 70

Distributed by: minilablaser.com
4.
If the positioning pin is not smoothly inserted into the hole, loosen the screws of magazine deck A.
(three screws)
5.
Adjust the position of magazine deck A so that the positioning pin fits the hole smoothly.
6.
Tighten screws on magazine deck A. (three screws)
7.
Perform Arm Unit 1 Zigzagging Correction.
36060
8.
When repeating the zigzagging adjustment of magazine deck A, repeat Step 1 to Step 7.
22100
Magazine deck A
22100
Magazine section
G072369
8/8