Pdf417 Set Length 1 - Datalogic Gryphon I GBT4400 Product Reference Manual
2d family general purpose handheld area imager bar code reader
Hide thumbs
Also See for Gryphon I GBT4400:
- Quick reference manual (68 pages) ,
- Product reference manual (350 pages) ,
- Quick reference manual (64 pages)
Table of Contents
Advertisement
PDF417
PDF417 Set Length 1
Specifies one of the bar code lengths for
label length if in
Length includes the bar code's data characters only. Characters can be set from 0001 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be
considered to be 2,710.
See
page 265
$CP4L1
Select PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
Product Reference Guide
Variable Length
Mode, or the first fixed length if in Fixed Length Mode.
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
PDF417 Length
Control. Length 1 is the minimum
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
217
Advertisement
Table of Contents
