Standard 2 Of 5 Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual

Standard 2 of 5

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
is the maximum label length if in
Length
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 10
setting this feature.
Table 10. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode. Length includes the bar code's check and data characters.
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Standard 2 of 5 Length
Variable Length Mode, or the second fixed length if in
page 265
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Control. Length 2
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed
161