Stand Mode Indication - Datalogic Gryphon I GBT4400 Product Reference Manual
2d family general purpose handheld area imager bar code reader
Hide thumbs
Also See for Gryphon I GBT4400:
- Quick reference manual (68 pages) ,
- Product reference manual (350 pages) ,
- Product reference manual (324 pages)
Table of Contents
Advertisement
Enter/Exit Programming Mode
Reading Parameters
Stand Mode Indication
This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue
indicator will blink when Stand Mode scanning is active. If reader detects motion (or removed
from base station for cordless models) and switches out of Stand Mode into Triggered Mode,
blinking will stop until Stand Mode is active again.
$CSMFL00(CR)
DEFAULT
Stand Mode Indication = Disable
$CSMFL01(CR)
Stand Mode Indication = Enable
98
Gryphon™ I GD44XX/GBT4400/GM440X
Advertisement
Table of Contents
