Pdf417 Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual

Enter/Exit Programming Mode

PDF417 Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. Length includes the bar code's check, data, and full-ASCII shift characters. The length
does not include start/stop characters. Characters can be set from 01 to 2,710 characters (pad
with zeroes) in increments of 01. Any value greater than 2,710 will be considered to be 2,710.
See page 265
$CP4L2
Select PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
218
for detailed instructions on setting this feature.
DEFAULT
PDF417 Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
Length 2 is 2,710 Characters
Gryphon™ I GD44XX/GBT4400/GM440X
PDF417
Control. Length 2 is the
representing your
CANCEL