Configuration Updates; Automatic Configuration Update; Copy Configuration To Scanner; Copy Configuration To Base Station - Datalogic Gryphon I GBT4400 Product Reference Manual

Configuration Updates

See page 285

Automatic Configuration Update

When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration. See
formation on this feature.
$CBTCU01(CR)
Automatic Configuration Update = Enable

Copy Configuration to Scanner

Scan the following label to copy the current Base Station configuration to the scanner. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time con-
figuration update to be performed on the scanner.

Copy Configuration to Base Station

Scan the following label to copy the current scanner configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the Base Station.
Product Reference Guide
Configuration Updates
in "References" for detailed information and examples of these features.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this bar code.
py g
Copy Configuration to Scanner
Cpycfg2Ba
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar code.
Enter/Exit Programming Mode
$CBTCU00(CR)
Automatic Configuration Update = Disable
DEFAULT
page 285 for more in-
239