Qr Code Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual
2d family general purpose handheld area imager bar code reader
Hide thumbs
Also See for Gryphon I GBT4400:
- Quick reference manual (68 pages) ,
- Product reference manual (350 pages) ,
- Quick reference manual (60 pages)
Table of Contents
Advertisement
Enter/Exit Programming Mode
QR Code
This feature specifies one of the bar code lengths for
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. Characters can be set from 0001 to 7,089 characters in increments of 0001 (pad with
zeroes).
See
page 265
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
224
Set Length 2
for detailed instructions on setting this feature.
DEFAULT
QR Code Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
Length 2 is 7,089 Characters
Gryphon™ I GD44XX/GBT4400/GM440X
QR Code
Control. Length 2 is the
representing your
CANCEL
Advertisement
Table of Contents
