Scanning Features; Scan Mode - Datalogic Gryphon I GBT4400 Product Reference Manual

Scanning Features

Scan Mode

This mode is associated with typical handheld reader operation. Selects the scan operating mode
for the reader. The following selections are valid for all models:
Trigger Single:
occurs:
Trigger Hold Multiple:
the trigger is released or
scanning.
this mode.
Trigger Pulse Multiple:
Scanning Active Time
Read Timeout
Flashing:
Flash On Time
Flash is OFF scanning is deactivated.
Always On:
trigger is pulled, the reader acts as if it is in Trigger Single Mode.
prevents undesired multiple reads of the same label while in this mode.
Stand Mode:
when an item is placed in the reader's field of view. If the trigger is pulled, the reader acts as if it
in single read mode.
mode.
Product Reference Guide
When the trigger is pulled, scanning is activated until one of the following
- Scanning Active Time has elapsed
- a label has been read
- the trigger is released
When the trigger is pulled, scanning starts and the product scans until
Scanning Active Time
Double Read Timeout
When the trigger is pulled, continuous scanning is activated until
has elapsed or the trigger has been released and pulled again.
prevents undesired multiple reads of the same label while in this mode.
The reader flashes on and off regardless of the trigger status. Flash rate is controlled by
and Flash Off Time. When Flash is ON the imager reads continuously; when
No trigger pull is required to read a bar code. Scanning is continually on. If the
No trigger pull is required to read a bar code. Scanning is turned on automatically
Double Read Timeout
has elapsed. Reading a label does not disable
prevents undesired multiple reads of the same label while in
prevents undesired multiple reads while in this

Scanning Features

Double
Double Read Timeout
277