RF Address Stamping
The features in this section are valid only for Gryphon Bluetooth models. Also reference the
Setup section for instructions on
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be transmitted to the host
and, if so, at what position with respect to the label data. See
detailed information and examples for setting this feature.
DEFAULT
$CBTAS01(CR)
Source Radio Address Transmission = Prefix
Product Reference Guide
BLUETOOTH-ONLY FEATURES
Linking a BT Reader to a PC, starting on page
RF Address Stamping
When included as a prefix, the source-radio ID is displayed after all label
formatting has been applied. The 6 byte hex address is sent as 12 ascii char-
acters, i.e., an address of 00 06 66 00 1A ED will be sent as (shown in hex):
30 30 30 36 36 36 30 30 31 41 45 44
Enter/Exit Programming Mode
page 285
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
26.
in "References" for
243