Changing The Base Station Position - Datalogic Gryphon I GBT4400 Product Reference Manual

Configuring the Base Station

Changing the Base Station Position

The base station is configured by installing one of two sets of mechanical parts that come with
the cordless kit. The default mounts (shown below) provide three options: vertical (wall)
mounting, standing (45°), or horizontal mounting with a higher mechanical retention of the
scanner. Use the other mounts only for horizontal mounting, with lower retention of the
scanner. The different parts may be interchanged to customize retention preferences.
1. Insert the appropriate parts for the desired base station position, as shown below.
CAUTION
2. Using your thumbs, push open the plastic tabs on the bottom of the base to free the wing
Product Reference Guide
A tool such as a rigid pen or a flat screwdriver can be used to change the
mounts. Do not allow it to touch the contacts.
Standing,
Horizontal
or Vertical
To ensure best contact and performance, do not intermix the parts of the two
different mount sets.
holders.
Tab
Tab
Setup
Horizontal
ONLY
21