About The Reader - Datalogic Gryphon I GBT4400 Product Reference Manual

About the Reader

About the Reader
Typically, units are factory-programmed for the most common terminal and communications
settings. If you need to modify any programmable settings, custom configuration can be
accomplished by scanning the programming bar codes within this guide.
Two models of the Gryphon 2D are available, and are covered in this manual:
•
•
Programming can alternatively be performed using the Datalogic Aladdin™ Configuration
application which is downloadable from the Datalogic website listed on the back cover of this
manual. This multi-platform utility program allows device configuration using a PC. It
communicates to the device using a serial or USB cable and can also create configuration bar
codes to print.
Advancements in the LED technology used in the imager-based readers significantly improve
the illumination of the target field of view, resulting in higher scan efficiency. Whether used in
Single Trigger or Continuous Mode, the ergonomic design of the reader will help to promote
comfortable handling during extended periods of use.
"Interface Selection" on page 29
See
model type.
Product Reference Guide
Gryphon I GD44XX - Corded 2D imager bar code reader
Gryphon I GBT4400 - Model with Bluetooth options.
for a listing and descriptions of available interface sets by
Introduction
11