Cover Paper Exit Assembly - Xerox WorkCentre Pro 412 Service Manual

6-9 Cover Paper Exit Assembly

1. Before you remove the cover paper exit assem-
bly, you should remove:
- Rear cover (see page 6-3).
- Scanner assembly (see page 6-4).
- Side cover assembly (see page 6-9).
- Exit assembly (see page 6-12).
2. Remove four screws and take out the dummy
base frame.
WorkCentre Pro 412
Launch Issue
3. Remove two screws and cover paper exit
assembly, as shown below.
Dummy Base Frame
August 2001
Disassembly and Reassembly
Cover Paper Exit Ass'y
6-11