Visonic PowerMaster-10 G2 User Manual page 48

F. To Adjust the Volume Level of the Voice Announcements
21.
or
22.
Voice volume
MID
23.
or
MAX
24.
MAX
☺
Return to step 22
G. To Enable / Disable the Voice Option
25.
or
26.
Voice option
enable prompts
27.
or
disable prompts
disable prompts
☺
Return to step 26
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2.
The display shows the currently selected setting (indicated by
3
a. Select between MAX, MID, MIN or OFF.
b. When you are selecting a level, you will hear a corresponding signal (beeps, chime, prompts, "1, 2, 3")
whose volume strength is according to the selected volume level.
4
The symbol now appears next to the newly selected option.
5
Refers to PowerMaster-30 G2 with voice option only.
6
If you have selected "
loudspeaker by pressing the
7.
You can also adjust the volume level of the beeps or voice announcements by pressing the
buttons, (see Chapter 2 - Adjusting the Speech Volume and the Volume of the Keypad Beeps).
8
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
D-304829 PowerMaster-10/30 G2 User's Guide
Click the
and press
The display shows the currently selected option.
Click the
volume level for the voice announcements, for example, [MAX].
When you are satisfied with the setting, press
A "Happy Tune"
returns to step 22.
5
Click the
and press
The display shows the currently selected setting.
Click the
setting, for example, "disable prompts" and press
A "Happy Tune"
returns to step 26.
Additional Information (section B.15)
enable prompts ", make sure that the voice prompts can be heard over the
key on the control panel keypad.
MENUS AND FUNCTIONS
5
or button until the display reads [Voice volume],
.
or button until the display reads the desired
☺ sounds. The display confirms the saved setting, then
4, 7, 8
button until the display reads [Voice option],
or
.
or button until the display reads the desired
☺ sounds. The display confirms the saved setting, then
4, 8
), for example, "
2
3
to confirm.
to confirm.
MID
".
or
6
6,
47