End The Operation And Stop The System - JRC JMA-5206 Instruction Manual

3.1.4 End the Operation and Stop the System

Exit 1 Press [STBY] key.
The radar will stop transmission and the antenna will stop rotating.
Maintain the standby state if radar observation is restarted in a relatively short time.
Only pressing the [TX/PRF] key starts observation.
2 Press the [STBY] key and the [TX/PRF] key together.
The system will be turned off.
TRANSMIT at the upper left of the radar display changes to STANDBY .
Warning
When conducting maintenance work, make sure to turn
off the power and unplug the power connector J1 of the
processor so that the power supply to the equipment is
completely cut off.
Some equipment components can carry electrical
current even after the power switch is turned off, and
conducting maintenance work without unplugging the
power connector
equipment failure, or accidents.
3─4
3.1 FLOW OPERATION
may result in electrocution,
3