JRC JMA-5206 Instruction Manual page 155

[IV] Saving navigation information (Save User Map)
This function is available only when navigation equipment is connected with the system or the own
ship's position is entered in manual mode.
Procedures 1 Press [4] key while the User Map
Setting Menu is open.
2 Press [2] key.
The Save User Map Menu will appear.
* Each time you press [1] key, the Device item is switched between
INTERNAL and CARD2.
INTERNAL: Saves data in the processor.
CARD2: Saves data in CARD2.
To select CARD2, insert the flash memory card, in which data has
been saved, into card slot 2 (upper stage).
3 Select the number of the file to be
saved, pressing the numeric key.
The Name Input Menu will appear.
4 Use the trackball to select an
alphabetic character A-Z or 0-9 shown
in the menu and press [ENT] key on
your required characters.
A maximum of 8 characters can be entered.
5 Repeat step 4 until the file name to be
saved is created, move the cursor to
ENT , and press [ENT] key.
The currently displayed navigation information
will be saved.
3.8 DISPLAY NAVIGATION INFORMATION
3. All Files to Card 2
3─86
Save User Map
1. Device
INTERNAL
2. Save User MAP
0. EXIT
Save User Map
1. TOKYO
2. OSAKA
3. SENDAI
4. NEW YORK
5. SEATLE
9. Next Page
0. EXIT
>
3
>