5.2.2 Canceling Unwanted Targets
Unwanted targets can be canceled one by one in the following cases:
• Tracking is no longer necessary for targets with which vectors/symbols are displayed after being acquired
and tracked.
• The number of vectors on the radar display needs to be reduced for easy observation.
When targets are to be re-acquired from the beginning, all the current vectors can also be canceled.
Canceling targets one by one
Procedures
1
Move the cross cursor mark onto the target to be canceled.
2
Press the [TGT CNCL] key.
The target's vectors and symbols will disappear, and only the radar video remains.
Canceling all targets collectively
Procedures
1
Hold down the [TGT CNCL] key.
The vectors and symbols of all the targets will disappear, and only the radar videos
remain.
Note: When all the targets have been canceled, the system stops tracking them. Thus, you need to re-acquire
targets in manual or automatic acquisition mode. Do not cancel all the targets unless otherwise
required.
5─14
5.2 ATA OPERATION
5