Antenna Height Adjustment - JRC JMA-5206 Instruction Manual

Antenna Height Adjustment

Set the antenna height above the sea level, but change this setting carelessly.
Procedures 1
2
3
4
5
Exit 1
Measure the height from the sea level to
the antenna in advance.
Open the Equipment Setup Menu.
Press [4] key.
The TRX Setting Menu will appear.
Press [1] key.
The Antenna Height Set Value window will
appear.
Select the antenna height measured in
step 1 from the pull-down menu by
pressing the numeric key [1] to [4].
The antenna height will be determined.
Press [RADAR MENU] key.
The Main Menu will reappear.
8─39
TRX Setting
1. Anntena Height
5-10m
2. Tune Peak Adjust
3. Tune Indicator Adjust
4. PM Adjustment
5.Manual Tune Adjustment
7. Output Pulse
8.Antenna Location
0m
0. EXIT
0
0
0
2048
0m