JRC JMA-5206 Instruction Manual page 76

Menu Operation with the Trackball
The menu items are software buttons that can be operated with the trackball.
An item can be selected by pointing the trackball cursor to the item and pressing [ENT] key, instead
of using the numeric key.
Example of menu display
Item number
Software button
Process Setting
1. Video Latitude
NORMAL
2. VD Noise Rejection NORMAL
1.
2. WIDE
3. Auto DR Control
3. NARROW
Super Wide
4.
4. Process Switch
5. 2nd Process Mode
REMAIN
6.Process Switch Range
6.2nm
7. Fast Target Detection
8. User Function Setting >
0. EXIT
3─7
LOW
ON
OFF
OFF
The selected item is
displayed by pressing the
corresponding numeric
key.
An item can be selected by
pressing the corresponding
numeric key.
An item can also be
selected by the trackball
and by pressing [ENT]
key.
An item can also be
selected by pointing the
trackball cursor to the item
and pressing [ENT] key.
Press [8] key to move to
the lower level.
Movement to the lower
level can also be done by
pointing the trackball
cursor to the item and
pressing [ENT] key.
Press [0] key move to the
higher level. Movement
to the higher level can also
be done by pointing the
trackball cursor to 0.EXIT
and pressing [ENT] key.