JRC JMA-5206 Instruction Manual page 188

Correcting Chart Position (Map Display Setting)
Procedures 1
[1] Shift Coast Line 1
Set the correction value by operating the cursor.
1
2
3
Cancellation of Shift Coast Line 1
1
Press [RADAR MENU] key twice.
Press [9] key.
Press [5] key.
Press [5] key.
The Map Display Setting Menu will appear.
There are three methods for correcting the chart
position.
Press [1] key while the Map Display
Setting Menu is open.
Move the cursor to the chart on which
a position is to be corrected, and
press [ENT] key.
Move the cursor to the radar video of
which position is to be corrected, and
press [ENT] key.
SETTING (correcting) will be indicated for Shift Coast Line 1.
At this time, MAP SHIFT will appear at the radar display button
indicating that the position is being corrected.
Press [1] key while the MAP Display Setting Menu is open.
DELETE (no correction) will be indicated for Shift Coast Line 1.
At this time, MAP SHIFT will disappear from the lower right of the radar display.
3─119
Map Display Setting
1. Shift Coast Line 1
SETTING
2. Shift Coast Line 2
N0.000'
E0.000'
3. LAT/LON Correction
N0.000'
E0.000'
4. MAP Center Position
N 35°00.000'
E140°00.000'
5. LORAN C Correction
6. LORAN A Correction
7. DECCA Correction
0. EXIT
29 on page 2-7,