JRC JMA-5206 Instruction Manual page 242

Name entry (Name)
Procedures 1
2
While the ATA Target INFO screen is
open, press [1] key.
For the entry of a new name
→ 2. INPUT
For the selection of a name from
names that have already been
entered
→ 1. DATA BASE.
For new entry
Selecting INPUT displays the screen shown
below.
After making an entry, place the cursor over
[ENT] key and then press it.
When the name entered with INPUT is
changed to a target name, it is saved in DATA
BASE.
* Up to eight characters can be entered as a
name.
For calling a name from the names that have been entered
Selecting DATA BASE lists INPUT names that have already been entered. From the list,
select a name you want to use.
* Names for 32 ships can be saved in DATA BASE.
5─23
ATA Target INFO
Target ID
1. Name
1. DATA BASE
2. INPUT
2. Track Color
3. OFF
0. EXIT
Name
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I
K L M N O P Q R S T
U V W X Y Z SP
DEL BS
EXIT
J
＜ ＞
ENT