JRC JMA-5206 Instruction Manual page 341

Bearing Pulse Output Adjustment (Output Pulse)
Set the output value of bearing pulse. This radar can set the output value to 2048 pulses and 4096 pulses.
This setting is allowed only when a 25 kw antenna is used.
Procedures 1 Open the Equipment Setup Menu.
2 Press [4] key.
The TRX Setting Menu will appear.
3 Press [7] key.
4 Select a set value to be used.
Exit 1 Press [RADAR MENU] key.
The Main Menu will reappear.
1. Anntena Height
2. Tune Peak Adjust
3. Tune Indicator Adjust
4. PM Adjustment
5.Manual Tune Adjustment
7. Output Pulse
8.Antenna Location
0. EXIT
8─40
8.5 Adjustments
TRX Setting
5-10m
0
0
0
2048
0m 0m
8