JRC JMA-5206 Instruction Manual page 354

[II] Making Sector Function (Make Sector 1, 2, 3)
Procedures 1
2
3
4
5
Exit 1
Open the Equipment Setup Menu.
Press [7] key.
The Sector Blank Menu will appear.
Slect the number you want to make
sector blank, pressing the numeric
keys [4] to [6].
The sector blank for the numeric key pressed
will be made.
Set the start point of the sector blank
by operating the [EBL] dial, and then
press ENT.
The start angle of the sector blank will be set.
Set the end point of the sector blank
by operating the [EBL] dial, and then
press ENT.
The end angle of the sector blank will be set.
Press [RADAR MENU] key.
The Main Menu will reappear.
8─53
Sector Blank
1. Sector 1
2. Sector2
3. Sector3
4. Make Sector 1
5. Make Sector 2
6. Make Sector 3
7. ENT
0. EXIT
ON
ON
ON