JRC JMA-5206 Instruction Manual page 313

[IV] PM Display
Displays the bar indicating the performance monitor status.
* Execution of this item needs a PM unit.
Procedures 1 Press [4] key while the Test Menu is
open, and set PM Display to ON.
The PM bar will appear under the MAGI bar.
The setting of PM Display is switched back and
forth between ON and OFF each time [4] is
pressed.
Exit 1 Press [RADAR MENU] key.
The menu will be closed.
8.1 Performance Check
1. Self Test
2. Monitor Test
3. Keyboard Test
4. PM Display
5. Error Logging
6. System INFO
MAGI
PM
0. EXIT
8─12
Test Menu
ON
8