JRC JMA-5206 Instruction Manual page 153

[II] Loading navigation information (Load User Map)
Procedures 1 Press [2] key while the User Map
Setting Menu is open.
The Load User Map Menu will appear.
2 Press [2] key.
The list of navigation information files saved
in the system will appear.
* Each time you press [1] key, the Device item is switched between
INTERNAL and CARD2.
INTERNAL: Reads saved data from the processor.
CARD2: Reads saved data from CARD2.
To select CARD2, insert the flash memory card, in which data has
been saved, into card slot 2 (upper stage).
3 Select the number of the file to be
loaded, pressing the numeric key.
The selected navigation information will be
loaded and shown on the radar display.
3.8 DISPLAY NAVIGATION INFORMATION
1. Device
2. Load User MAP
0. EXIT
1. TOKYO
2. OSAKA
3. SENDAI
4. NEW YORK
5. SEATLE
9. Next Page
0. EXIT
3─84
Load User Map
INTERNAL
>
Load User Map
3