JRC JMA-5206 Instruction Manual page 385

Setting in DGPS Receiver (DGPS Setting)
Set an initial value in the DGPS receiver (our DGPS receiver).
[I] DGPS Mode Setting (Mode)
Procedures 1 Press [RADAR MENU] key twice.
The Radar Menu will appear.
2 Press [7] key.
NAV Equipment Setting Menu will appear.
3 Press [7] key.
GPS Setting Menu will appear.
4 Press [2] key.
DGPS Setting Menu will appear.
5 Press [1] key.
Each time [1] key is pressed, AUTO/MANUAL
is toggled.
Auto:
Manual: Manually sets the working
6 After having entered the value, press
[5] key to transmit the setting contents
to the DGPS receiver.
Exit 1 Press [RADAR MENU] key.
The Main Menu will reappear.
Automatically sets the working
frequency of Beacon station.
frequency.
(From the next page)
8─84
8.6 Setting
DGPS Setting
1. Mode
AUTO
2. Frequency
275.0KHz
3. Baud Rate (BPS)
50
4. DGPS Mode
ON
5. Send Data
Status
No Beacon RCV connection
Frequency --- KHz
Baud Rate --- Baud
RSSI ---
0. EXIT
8