End The Operation And Stop The System - JRC JMA-9123-7XA Instruction Manual

3.1.5

End the Operation and Stop the System

Exit
1) Press [TX/STBY] key.
The radar will stop transmission and the antenna will stop rotating.
Transmit
Press [POWER] key.
2)
The system will be turned off.
• When conducting maintenance work, make sure to turn
!
• Some equipment components can carry electrical
JMA-9100 Instruction Manual
at the upper left of the radar display changes to
Maintain the standby state if radar observation is restarted in a
relatively short time.Only pressing the [TX/STBY] key starts
i
observation.
off the power and make the main breaker OFF so that the
power supply to the equipment is completely cut off.
current even after the power switch is turned off, and
conducting maintenance work without unplugging the
power connector may result in electrocution, equipment
failure, or accidents.
3－ 5
> >
3.BASIC OPERATION 3.1 OPERATION FLOW
Standby
.
3