JRC JMA-5206 Instruction Manual page 210

[II] Erase Waypoint/Route (CLR WPT/Route Data)
Erase saved WPT/Route from inside the processor.
Procedures 1
2
3
4
[III] Initialize Card 2 (Format Card 2)
Initialize Card 2.
Procedures 1
2
3
4
Press [RADAR MENU] key twice.
The Radar Menu will appear.
Press [9] key.
The Plot Menu will appear.
Press [7] key.
The CLR MEM INIT Card Menu will appear.
Press [2] key.
The Waypoint/Route Erase Execution window will appear.
1. Erase
2: Cancel
Press [RADAR MENU] key twice.
The Radar Menu will appear.
Press [9] key.
The Plot Menu will appear.
Press [7] key.
The CLR MEM INIT Card Menu will appear.
Press [3] key.
The window to select whether or not Card 2 is initialized will appear.
1. Initialize
2: Cancel
3─141