JRC JMA-5206 Instruction Manual page 127

[II] Using User Key Switches (Directly displaying a specified menu)
Preset the menu that is to be displayed with the user key switch.
Setting the menu that is to be displayed with User Key 1:
Procedures 1 Perform the general menu open procedure to open the menu that is to
be directly displayed with User Key 1.
2 While the menu is open, hold down [USER KEY1] key for 2 seconds.
The menu will be assigned to [USER KEY1] key.
Setting the menu that is to be displayed with User Key 2:
Procedures 1 Perform the general menu open procedure to open the menu that is to
be directly displayed with User Key 2.
2 While the menu is open, hold down [USER KEY2] key for 2 seconds.
The menu will be assigned to [USER KEY2] key.
Directly displaying the menus assigned to the User Keys:
Procedures 1 Press [USER KEY1] key.
The menu assigned to [USER KEY1] key will appear.
Subsequently, general menu operation can be performed.
Procedures 1 Press [USER KEY2] key.
The menu assigned to [USER KEY2] key will appear.
Subsequently, general menu operation can be performed.
3.5 BASIC OPERATIONS
3─58
3