JRC JMA-5206 Instruction Manual page 263

Procedures 1 Press [ATA MENU] key.
2 Press [2] key.
The AIS Setting Menu will appear.
3 Press [4] key.
The ten-key screen will appear.
4 Using numeric keys, enter the CPA
value you want to set, and then press
[ENT] key.
The entered CPA Limit value is determined.
5 Press [5] key.
The ten-key screen will appear.
6 Using numeric keys, enter the TCPA
value you want to set, and then press
[ENT] key.
The entered TCPA Limit value is determined.
* The collision decision criteria set on the AIS side are also available on ATA.
1. AIS Function
2. AIS Symbol Display
3. ATA Symbol Display
4. CPA Limit
5. TCPA Limit
6. AIS Filter Setting
7. Identical Distance
0. EXIT
5─44
5.3 AIS OPERATION
AIS Setting
OFF
OFF
ON
1 nm
1 min
>
100 m
5