Trails Interval; Antenna Height; Save Present State; Initialize - JRC JMA-3400 Series Instruction Manual

Chapter 5 VARIOUS FUNCTIONS

5.23.3 TRAILS INTERVAL

Set the interval of radar trails.
The options in this menu depend on the setting of MAX Interval (refer to "5.23 FUNCTION SETTING", "8.2
TRAILS").
If MAX Interval setting is changed, this menu is set the shortest interval in the setting (except "Off").

5.23.4 ANTENNA HEIGHT

Set the antenna height used in the function mode.
When default is selected, the value set in the Basic Adjustment is applied.
For Basic Adjustment, refer to "7.5 ANTENNA HEIGHT SETUP."

5.23.5 SAVE PRESENT STATE

Not function setting but the current status set in the main menu (for example, "5.16 RADAR ECHO SETTING"
and "5.20 TRAILS SETTING") is saved as the setting value of the selected function mode.
The confirmation dialog window is displayed. Select "YES", the operation is executed.

5.23.6 INITIALIZE

Initialize a selected function setting mode. The initialized mode values are set to the factory-set values.
About the factory-set values of each function setting mode, refer to "5.13 SWITCH THE FUNCTION."
The confirmation dialog window is displayed. Select "YES", the operation is executed.
99