Ldap Setting - Konica Minolta magicolor 1680MF Service Manual

12. UTILITY mode
12.4.5

LDAP SETTING

A. DISABLE/ENABLE
Function
• This function is used to set whether or not to use LDAP.
Use
• The default setting is ENABLE.
Setting/
procedure
B. LDAP SERVER ADDR.
Function • To set the LDAP server address.
Use • To enter LDAP server address.
• The default setting is 0.0.0.0.
Setting/
1. Select the [LDAP SERVER ADDR.], then press Select key.
procedure
2. Type in the IP address or host name for the LDAP server, then press Select key.
• The host name can contain a maximum of 64 characters.
C. LDAP PORT NO.
Function • To set the LDAP server port number.
Use • To enter the LDAP server port number.
• When SSL Setting is disable, the default value is 389.
• When SSL Setting is enable, the default value is 636.
Setting/
procedure
1. Select the [LDAP PORT NO.], then press Select key.
2. Type in the port number (1 - 65535), then press Select key.
D. SSL SETTING
Function • To set whether to use SSL (data encryption) for connecting to LDAP server.
Use • To use SSL (data encryption) for connecting to LDAP server.
• The default setting is DISABLE.
Setting/
procedure
E. SEARCH BASE
Function • To set the directory path for LDAP server.
Use • To enter the directory path for LDAP server.
1. Select the [SEARCH BASE], then press Select key.
Setting/
2. Specify the database where the LDAP server is searched, then press Select key.
procedure
• The search base can contain a maximum of 64 characters.
F. ATTRIBUTE
Function • To set a search attribute that is used to search a destination from LDAP server.
Use • To enter a search attribute that is used to search a destination from LDAP server.
1. Select the [ATTRIBUTE], then press Select key.
Setting/
2. Type in the attribute, then press Select key.
procedure
• The attribute can contain a maximum of 32 characters.
100
Field Service Ver. 1.0 Nov. 2008
DISABLE / "ENABLE"
"DISABLE" / ENABLE