Insufficient Memory Service Check - Lexmark MS315 Service Manual

Action
Step 5
POR into the Diagnostics menu and perform a sensor test:
Diagnostics Menu > Base Sensor Test > Narrow Media
Does the sensor state on the control panel display change when it is
toggled?
Step 6
a
Remove the main drive gearbox.
b
Check the gears for wear or damage.
c
Check the main drive motor for rotation.
Are the gears free of wear or damage and does the main drive motor
rotate?
Step 7
Replace the controller board.
Does the error remain?

Insufficient memory service check

Action
Step 1
Disable the Resource save feature:
Settings > Print Settings > Setup Menu > Resource Save > Off
Does the problem remain?
Step 2
Check the memory card for proper installation.
Is it properly installed?
Step 3
a
Print the Menu settings page:
Settings > Reports > Menu Settings Page
b
POR into the Configuration menu and reset the printer's settings to
factory default:
Configuration Menu > Factory Defaults > Restore Base
c
Remove the memory card.
d
Restart the printer.
Does the error remain?
Yes
Go to step 6.
Go to step 7.
Problem is solved.
Yes
Go to step 2.
Go to step 3.
Replace the controller
board. See
board removal" on
page
Diagnostic information
82
No
Replace the narrow
media/bin full sensor.
See "Narrow
media/bin full sensor
removal" on page
233.
Replace the main drive
gearbox. See
drive gearbox
removal" on page
169.
Contact the next level
of support.
No
The problem is solved.
Reseat the memory
card.
Replace the memory
"Controller card.
187.
4514
"Main