Uicc Removal - Lexmark MS315 Service Manual

UICC removal

1
Remove the right cover. See
2
Remove the nameplate. See
3
Remove the bezel. See
4
Remove the control panel assembly. See
5
Remove the cable from the connector (A).
6
Remove the eight screws (B).
7
Flip the UICC, and then remove the screw (C).
Note: The control panel cover, buttons, and light pipe are not included with the UICC.
"Right cover removal" on page
"Nameplate removal" on page
"Bezel removal" on page
"Control panel assembly removal" on page
B
C
Repair information
185.
199.
198.
A
202
4514
199.
B