Updating The Printer Firmware; Using The Flash Drive - Lexmark MS315 Service Manual

4
Click Import. The file uploads to the printer.
5
Repeat steps 3 and 4 for the other zip files that are included in the expanded zip file.

Updating the printer firmware

Using the flash drive

This option is available only in printer models with front USB port. The printer must be in ready state in order to update
the firmware.
Warning—Potential Damage: Before updating the printer firmware, contact the next level of support to confirm or
obtain the correct code. Using an incorrect code level may damage the printer.
Make sure that the Enable Drive and Update Code settings are enabled. These settings are found in the Flash drive
menu under the Settings menu.
1
Insert the flash drive into the USB port.
2
From the home screen, navigate to USB Menu: Print from USB > Accept or OK.
3
Select the file to be flashed.
The printer starts to update the printer firmware.
Warning—Potential Damage: Do not turn off the printer while the update is going on. The printer automatically
performs a POR sequence and returns to a ready state after the update is completed.
Repair information
149
4514