Replace Imaging Unit, 0 Estimated Pages Remain [84.Xy]; Replace Unsupported Cartridge [32.Xy]; Replace Unsupported Imaging Unit [32.Xy]; Serial Option [X] Error [54] - Lexmark MS315 Service Manual

Region number
9
Notes:
•
The x and y values represent .xy in the code that appears on the printer control panel.
•
The x and y values must match for printing to continue.

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the "Replacing supplies" section of the User's
Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the "Replacing supplies" section of the User's
Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Serial option [x] error [54]

Try one or more of the following:
•
Make sure that the serial cable is properly connected and is the correct one for the serial port.
•
Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and computer.
•
From the printer control panel, press
• Turn off the printer, and then turn it back on.
Region
Invalid
to continue printing.
Diagnostic information
75
4514